Onze webwinkel maakt gebruik van cookies om een betere gebruikerservaring te bieden en we raden u aan om het gebruik ervan te accepteren om uw navigatie ten volle te genieten
Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
Dynamic Control (Input)
:
dbx Type IV™ limiter circuit
Input Impedance
:
20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver
:
1 x JBL 275G 380mm (15 in) woofer
MF Driver
:
1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer
HF Driver
:
1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver"
Enclosure
:
Trapezoidal, 18 mm, plywood
Suspension / Mounting
:
12 x M10 Suspension Points
Transport
:
2 x integrated handle with injection molded backing cup
Finish
:
Obsidian DuraFlex™ finish
Grille
:
Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors
:
2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connector
:
1 male XLR balanced output
Dimensions (H x W x D)
:
952.5 mm x 445.0 mm x 537.97 mm (37.5 in x 17.52 in x 21.18 in)
Net Weight
:
34.9 kg (77 lb)
Applications :
This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.
JBL_PRX735/230
Datasheet
XLR 3P
Ja
Low/Sub Speaker formaat (inch)
15" / 38,10 cm
Specifieke referenties
Nieuw product
Bij dj verkoop zit u altijd goed met de service en prijs!
JBL PRX812W Actieve 12" 2-weg fullrange speaker voor gebruik als floormonitor of hoofdspeaker. De speaker biedt een hoog volume in een lichtgewicht en compacte vorm.